|
Standard features include:
- Voltage controlled/ restrained phase overcurrent
- Instantaneous phase and ground overcurrent protection for inadvertent energization
- Ground overcurrent
- 100% stator ground fault protection for high impedance grounded units
- Reverse power
- Loss of Field
- VT fuse loss
- Over and undervoltage and over and underfrequency
- Overexcitation
- Negative sequence overcurrent and overvoltage
- Sync check
- Breaker failure
- Logic timers, virtual control switches, metering, monitoring, fault recording, and multiple communications ports
- BESTCOMS GUI software available to aid in setup.
Both H1 and S1 cases are fully drawout, and the S1 includes a removable test paddle facilitating in case testing
|
 "24 - Volts per Hertz"){kind=small}
 "40 - Field Relay"){kind=small}
 "32 - Directional Power"){kind=small}
 "46 - Reverse Phase Sequence"){kind=small}
 "47 - Phase Sequence"){kind=small}
 "50 - Instantaneous Overcurrent"){kind=small}
 "51 - AC Time Overcurrent"){kind=small}
 "59 - Overvoltage"){kind=small}
 "60 - Voltage Balance"){kind=small}
 "62 - Time Delay"){kind=small}
 "BF - Breaker Failure"){kind=small}
 "81 - Frequency Relay"){kind=small}
